Brakes are pretty much the most important safety device on your car. If you’ve ever partially lost your brakes in the past, you’ll agree that it’s not something you want to experience again. Inspecting your brakes twice a year for wear and damage can protect you and your passengers. Additionally, it will also help save you money by catching any damage before it becomes too costly.
Brake System Components That Can Fail
The master cylinder, the heart of the vehicle’s braking system, holds the brake fluid when it is not being delivered to the brakes through the brake lines. If brake fluid leaks because the master cylinder is worn or brake lines are plugged or broken, the fluid cannot be delivered, and the brake pads will become ruined.
The brake fluid itself can become dirty or contaminated as it draws rust-causing moisture and picks up other debris, or it can break down from excess heat. Clean brake fluid is either clear or slightly yellow, while dirty brake fluid may be brown or even black. Old and dirty brake fluid can damage ABS brake systems internally.
The brake lines connect to the master cylinder through a combination valve, which combines a metering and proportioning valve. It regulates the pressure on the front and rear wheels to make sure both sets of brakes are applied simultaneously. A malfunctioning combination valve may cause the wheels to lock up.
Brake pads and shoes can be made of ceramic, metal or organic materials, while the disc rotors and drums they press against are made of metal. Because the pads and shoes create friction to stop the car, they gradually wear down over time and may wear away completely, letting the metal of the calipers and cylinders they are attached to grind against the rotors and drums and damage them. Some pads have a metal strip attached that sounds a warning whistle when the pad becomes too worn, but this strip sounds only when the car is in motion and the brakes are not applied.
Air Conditioning Service
One of our trained air conditioning specialists will inspect your car’s air conditioner, all A/C lines, evaporator and compressor for leaks and wear.
Cooling System Service
Our team will flush the cooling system, conduct a pressure test, check hoses and cap and check connections.
We will remove old worn-out gear oil from the front and rear differential and transfer case.
Fuel/Air Induction Cleanup
Using specialized equipment, our technicians will quickly and effectively clean intake manifolds, ports, intake valves and combustion chambers and install injector cleaning additives in tanks. This service will restore lost power and performance and will reduce harmful exhaust emissions.
Oil and Oil Filter Service
Experts recommend changing the oil and oil filter in your vehicle every 3 months or 3,000 miles, whichever is first. It’s an essential way to maximize engine protection.
Power Steering Flush
Our technicians use a powerful cleaner to dissolve gum and varnish in your car’s power steering unit. Next, we will flush old, worn-out contaminated fluid and install fresh new fluid fortified with a special antioxidant and anti-wear ingredients to prevent expensive mechanical failure.